Vernier caliper

Model și specificații etrier Vernier

Deadmin1

Model și specificații etrier Vernier

There are many specifications of vernier calipers, inclusiv 0-100mm, 0-150mm, 0-200mm, 0-300mm, 0-600mm, 0-1000mm, 0-1500mm, etc. în plus, precizia etrierului vernier este de asemenea de 0,01 mm, 0.02mm și 0,05 mm.
Metoda de citire a unui șubler vernier este similară cu cea a unui micrometru. It is structurally composed of a main scale and a vernier attached to the main scale that can slide freely.
There are several types of vernier calipers:

  1. Mechanical vernier calipers: Mechanical vernier calipers have the best measurement stability and are most widely used in automobile maintenance work.
  2. Digital display vernier caliper: The specific value measured will be displayed on the display in digital form, so the reading is very intuitive and clear, which can avoid the error of naked eye reading.
  3. Vernier caliper with table: It mainly uses the rack drive gear to drive the pointer to display the value. There is a rough scale on the main scale. Combined with the reading of the indicator, it is faster and more accurate than the reading of the mechanical vernier caliper.
Vernier caliper
Vernier caliper

Postări similare

How to Choose a Woodworking Drill

How to Choose a Woodworking Drill

Deadmin1

How to Choose a Woodworking Drill Choosing the right woodworking drill bit is essential for any woodworking project. Burghiul potrivit poate face diferența între un proiect de succes și un proiect nereușit, deci este important să știți ce să căutați atunci când selectați bitul potrivit. La selectarea burghiului potrivit, one of the…

What is the accuracy of the micrometer in mm

What is the accuracy of the micrometer in mm

Deadmin1

What is the accuracy of the micrometer in mm The micrometer is a kind of spiral micrometer, and the measurement accuracy of the micrometer is better than that of the vernier caliper! The measuring length of the micrometer can be accurate to 0.01mm. Micrometers are divided into two types: mechanical micrometers and electronic micrometers. 1….

Cum să calibrați indicatorul cadran cu afișaj digital

Cum să calibrați indicatorul cadran cu afișaj digital

Deadmin1

Cum să calibrați indicatorul cadran cu afișaj digital Cum să utilizați și să acordați atenție indicatorului cadran cu afișaj digital Pentru a permite indicatorului cadran digital să măsoare cu succes deformarea radială și laterală în diferite situații, de exemplu, la măsurarea bateriei radiale sau laterale pe un strung, indicatorul cu cadran digital ar trebui…

Common materials for milling cutters

Common materials for milling cutters

Deadmin1

Common materials for milling cutters 1) High-speed tool steel (referred to as high-speed steel, front steel, etc.), divided into general-purpose and special-purpose high-speed steel. It has the following characteristics: a. The content of alloy elements tungsten, chromium, molybdenum and vanadium is relatively high, and the quenching hardness can reach HRC62-70. At a high temperature of…

Commonly used reamer specifications and types

Commonly used reamer specifications and types

Deadmin1

Commonly used reamer specifications and types Reamer is a cutting tool used to process reamed holes (i.e. internal threads). It is often used in mechanical machining. At work. Reamers can come in many sizes and types according to different needs and processing materials. This article will introduce some commonly used reamer specifications and types. 1….

Lasă un răspuns

Adresa ta de email nu va fi publicată. Câmpurile obligatorii sunt marcate *