ノギスの型式と仕様

フライス刃数の違いと用途 フライスは、機械加工作業で最も一般的に使用される工具の一部です。. さまざまな形状を作成するために使用されます, サイズ, さまざまな素材の深さ. フライスの刃は、フライスの種類を決定する重要な要素です。…

Common materials for milling cutters 1) High-speed tool steel (referred to as high-speed steel, front steel, etc.), divided into general-purpose and special-purpose high-speed steel. It has the following characteristics: a. The content of alloy elements tungsten, chromium, molybdenum and vanadium is relatively high, and the quenching hardness can reach HRC62-70. At a high temperature of…

Maintenance method of vernier caliper A vernier caliper is a measuring tool for length, inner and outer diameters, and depth. The vernier caliper is composed of two parts, the paramount ruler and the sliding vernier attached to the central ruler. The paramount ruler is generally in millimeters, and the vernier has 10, 20, or 50…

What is the accuracy of the micrometer in mm The micrometer is a kind of spiral micrometer, and the measurement accuracy of the micrometer is better than that of the vernier caliper! The measuring length of the micrometer can be accurate to 0.01mm. Micrometers are divided into two types: mechanical micrometers and electronic micrometers. 1….

How to use and read the micrometer A, the use of the micrometer 1, before the use should check the zero point, slowly turn the tuning knob, make the rod and anvil contact, by the end of ratchet sound when moving feet mould scribed line on the sleeve (activity) shall be and fixed on the…

Types and applications of woodworking milling cutters Several commonly used woodworking milling cutters and their uses: straight knife: slotting and clearing the bottom knife: slotting and clearing the bottom Trimming knife: straight edge fillet knife: round edge Minzai knife: round edge and round bottom knife with line: Open round groove 90° V-shaped knife: open V-shaped…