¿Qué es un mandril de resorte??
¿Qué es un mandril de resorte??
Las pinzas de resorte se llaman pinzas o pinzas.. Es un accesorio cilíndrico que se utiliza para sujetar brocas o fresas instaladas en fresadoras.. Es una especie de dispositivo de fijación que se utiliza para fijar y reforzar piezas que necesitan ser modificadas.. Entonces, ¿qué hace una pinza de resorte?? 1. The advantages of spring chuck are light weight, fast acceleration, little influence by centrifugal force, and high concentricity; 2. When replacing the quick clamping parts, the chuck can be quickly changed to suit the workpiece size; 3. Limited range. The long axial dimension is more suitable for small parts. The three-jaw electric chuck for workpieces with consistent diameter and size is the standard workpiece clamping device for most lathe users. This chuck has sufficient versatility. How to use spring chuck: 1. The spring chuck is a fixture used to fix and reinforce parts that need to be modified. During daily maintenance, the spindle and chuck cone of the machine tool must be cleaned before installing the cone on the spindle. 2. After use, clean the main body and collet to prevent rust to ensure smooth use next time. 3. Before the body cone is installed on the spindle, clean the chuck cone and the machine tool spindle, and lightly tap the end face of the body with a rubber hammer or wooden hammer to ensure tightness and firmness or tighten it with a connecting rod. 4. Select the corresponding sleeve according to the processing needs, scrub it clean, put it into the inner hole of the main body, push the sliding cap of the main body gently to place the sleeve into the square hole in the main body, and then clamp the corresponding tool on the sleeve to complete the clamping, that is Can be processed and used. 5. When placing the tap into the tap sleeve, attention should be paid to placing the square shank into the square hole in the collet to increase the torque. 6. Gently push the sliding cap to remove the sleeve (or replace it). After use, clean the anti-rust, main body and collet.
